Flare x Copper Tube Compression Adapter Guide
The Flare x Copper Tube Compression Adapter is actually a versatile plumbing component that provides for secure and reliable connections in various plumbing projects. It was created to join flare fittings and copper tubing, providing a leak-proof seal and ensuring the correct flow of liquids and gases. The following information will give you an introduction to the characteristics, specifications, and applications of the copper flare fittings.
Understanding Flare Fittings
Flare fittings are essential components in plumbing systems which allow secure connections between pipes and tubing. These fittings include a 45° flare on one end, which allows for any tight and reliable connection with the corresponding flare in the tubing. Flare fittings are widely used in different applications because of their ability to resist vibration and mechanical pull-out.
One everyday sort of flare fitting will be the SAE 45° flare, which follows the specifications set from the Society of Automotive Engineers. These fittings use a 45° flare angle and are commonly used in automotive and hydraulic systems. They fulfill the functional requirements of SAE J512 and J513, ensuring their reliability and compatibility within these applications.
Along with the SAE 45° flare, another kind of flare fitting will be the inverted flare. This fitting includes a cone-shaped flare around the fitting end, providing a safe and secure connection with all the corresponding inverted flare around the tubing. Inverted flare fittings are a cost-effective option and commonly used in automotive brake and fuel systems.
Benefits of Flare Fittings
Flare fittings offer several positive aspects that make them a popular choice in plumbing systems:
- Potential to deal with vibration: The 45° flare design of those fittings enables them to withstand vibrations, ensuring the integrity from the connection even just in dynamic environments.
- Mechanical pull-out resistance: Flare fittings offer a secure connection that resists pulling forces, preventing accidental disconnection.
- Wide variety of applications: Flare fittings are versatile and can be utilized in various plumbing systems, including automotive, hydraulic, and gas applications.
- UL Listed: Many flare fittings are UL Listed, meaning they have been tested and certified by Underwriters Laboratories, a trusted safety organization.
Samples of Flare Fittings
Here are a few examples of flare fittings:
| Fitting Type | Description |
|---|---|
| Straight Flare | A straight fitting with 45° flare angles on both ends, used for connecting two flare fittings or a flare fitting and tubing. |
| Union Flare | A fitting with two flare ends joined with a union, making it possible for easy disconnection and reconnection of pipes or tubing. |
| Elbow Flare | An angled fitting with a flare end, employed for making 90° or 45° bends in plumbing systems. |
These are merely a few examples of many kinds of flare fittings available, each intended for specific applications and installation requirements.
In conclusion, flare fittings are essential components in plumbing systems because of the secure connections, potential to deal with vibration, and wide variety of applications. Whether it’s the SAE 45° flare or the inverted flare, these fittings provide reliable and leak-free connections, making them a preferred choice in a variety of plumbing projects.
Flare to Compression Adapter Options
The Flare x Copper Tube Compression Adapter offers an array of options to match different plumbing needs. These options include:
- Flare to male NPT
- Flare to flare
- Flare to female NPT
- Flare to metric
One notable feature of such adapters is definitely the steel nut option, which supplies additional strength and durability. This ensures a safe and secure and reliable connection, even in demanding plumbing applications.
Furthermore, some models of the Flare x Copper Tube Compression Adapter come with a Teflon seal on the valve core. This seal enhances the leak-proof capabilities of the adapter, providing you with satisfaction and confidence in the performance.
It’s also worth mentioning these adapters are machined to ARI Standards, guaranteeing precision and quality within their construction. This ensures compatibility with industry standards and enables seamless integration with existing plumbing systems.
Lastly, the finger-tight quick seal cap is an important feature in the Flare x Copper Tube Compression Adapter. This cap allows for easy and quick installation without making use of additional tools. It ensures a tight and secure connection, further enhancing the reliability and gratification from the adapter.
Flare to Compression Adapter Options
| Adapter Type | Features |
|---|---|
| Flare to male NPT | Steel nut option, Teflon seal, machined to ARI Standards, finger-tight quick seal cap |
| Flare to flare | Steel nut option, Teflon seal, machined to ARI Standards, finger-tight quick seal cap |
| Flare to female NPT | Steel nut option, Teflon seal, machined to ARI Standards, finger-tight quick seal cap |
| Flare to metric | Steel nut option, Teflon seal, machined to ARI Standards, finger-tight quick seal cap |
In conclusion, the Flare x Copper Tube Compression Adapter offers many different options to cater to different plumbing requirements. With features including the steel nut option, Teflon seal, and machined to ARI Standards, these adapters provide secure, durable, and-performance connections. The finger-tight quick seal cap adds convenience towards the installation process. Choose the Flare x Copper Tube Compression Adapter for reliable and leak-free plumbing connections.
Working Pressure Ranges and Temperature Ranges
The Flare x Copper Tube Compression Adapter provides reliable connections in plumbing projects, with working pressure ranges that vary based on the temperature and tubing size. It is crucial to ensure that the temperature and tubing size are inside the specified ranges to keep the integrity of the connection. The following is a review of the working pressure ranges at 73°F:
| Tubing Size | Working Pressure Range (PSI) |
|---|---|
| 1/8″ | 2800 |
| 1/4″ | 2000 |
| 3/8″ | 1800 |
| 1/2″ | 1600 |
| 5/8″ | 1400 |
| 3/4″ | 1200 |
| 7/8″ | 450 |
The Flare x Copper Tube Compression Adapter also provides a broad temperature range of -65°F to 250°F, rendering it ideal for various applications in plumbing projects.
Assembly Instructions for Flare Fittings
Proper assembly of flare fittings is essential to make certain a safe and secure and leak-proof connection. Follow these recommended assembly instructions to attain optimal results:
-
Inspect the flare fitting and also the tubing for just about any signs of damage or imperfections.
-
Make sure that both the flare fitting as well as the tubing are neat and free from dirt, debris, or any foreign substances.
-
Utilizing a tubing cutter, cut the tubing for the desired length ensuring a neat and square cut.
-
Remove any burrs or sharp edges through the tubing employing a deburring tool or a file.
-
Slide the flare nut onto the tubing, followed by the cone-shaped flare sleeve.
-
Carefully insert the tubing in to the fitting body until it reaches the bottom.
-
Tighten the flare nut using a flare nut wrench or a suitable wrench, making sure never to overtighten.
-
Inspect the connection to ensure that the flare is correctly formed and the tubing is securely held in place.
-
Perform a leakage test by pressurizing the system and checking for any indications of leaks.
-
If no leaks are detected, the assembly is done and ready for use.
Following these assembly instructions will help you achieve a reliable and sturdy connection along with your flare fittings.
| Step | Assembly Instructions for Flare Fittings |
|---|---|
| 1 | Inspect the flare fitting and also the tubing for just about any signs of damage or imperfections. |
| 2 | Make certain that the flare fitting and also the tubing are clean and free from dirt, debris, or any foreign substances. |
| 3 | Utilizing a tubing cutter, cut the tubing for the desired length ensuring a neat and square cut. |
| 4 | Remove any burrs or sharp edges from the tubing employing a deburring tool or perhaps a file. |
| 5 | Slide the flare nut onto the tubing, followed by the cone-shaped flare sleeve. |
| 6 | Carefully insert the tubing into the fitting body until it reaches the base. |
| 7 | Tighten the flare nut having a flare nut wrench or a suitable wrench, making sure not to overtighten. |
| 8 | Inspect the connection to ensure the flare is correctly formed and also the tubing is securely locked in place. |
| 9 | Carry out a leakage test by pressurizing the system and checking for just about any warning signs of leaks. |
| 10 | If no leaks are detected, the assembly is done and ready to use. |
Sizing and Nomenclature of Flare Fittings
Flare fittings play an important role in plumbing projects, and understanding their sizing and nomenclature is important for selecting the right fitting for your needs. Flare fittings are sized based on the numbers of sixteenths of an inch within the tube outer diameter (O.D.). Let’s breakdown the sizing and nomenclature to simplify your selection process.
Sizing
The very first series of numbers and letters within the part number identify the design and style and type from the flare fitting. The next series of numbers represents the size, using sixteenths of the inch. For instance, a part number like 1 49 F – 6 – 4 indicates a forging style, a 3/8″ (6/16) tube O.D. size, and a 1/4″ (4/16) pipe size.
Nomenclature
The nomenclature of flare fittings helps to identify the specific characteristics and dimensions of each fitting. Understanding the codes utilized in the part number ensures accurate selection and seamless ordering. Here’s an overview:
Nomenclature Description Style and Type Identifies the specific style and kind of flare fitting Tube O.D. Size Represents the size of the outer diameter from the tube, indicated in sixteenths of the inch Pipe Size Indicates how big the pipe that the flare fitting was created, also measured in sixteenths of the inch
By familiarizing yourself using the sizing and nomenclature of flare fittings, you are able to confidently choose the best fitting for the plumbing project and make sure a safe and secure and reliable connection.
Advantages and Uses of Flare Fittings
Flare fittings are widely used in plumbing projects because of their numerous advantages and versatile applications. These fittings offer several advantages which make them an ideal option for professionals in the business.
Advantages of Flare Fittings:
- Effectiveness against Mechanical Pull-Out: Flare fittings are made to resist mechanical pull-out, ensuring a safe and secure and reliable connection. This makes them perfect for applications where vibration or movement may occur.
- Repeated Assembly and Disassembly: Flare fittings can be easily assembled and disassembled many times without compromising integrity. This flexibility provides for easy adjustments, repairs, or modifications without making use of replacement.
- High-Quality Brass Materials: Flare fittings are produced from high-quality brass materials, guaranteeing durability and longevity. Brass is recognized for its corrosion resistance, making these fittings suitable for various plumbing applications.
Uses of Flare Fittings:
“Flare fittings are commonly used in an array of plumbing applications, because of their reliability and leak-proof characteristics.”
Here are some common applications where flare fittings are widely employed:
- Flammable Liquid Applications: Flare fittings are listed with Underwriter’s Laboratories for flammable liquid applications, causing them to be a secure and trusted option for projects concerning the transportation or distribution of flammable substances.
- Marine Applications: Due to their effectiveness against mechanical pull-out and corrosion resistance, flare fittings are widely used in marine plumbing systems, ensuring reliable connections in harsh saltwater environments.
- Refrigeration Applications: Flare fittings play an important role in refrigeration systems, providing leak-proof connections for refrigerant lines, ensuring optimal performance and efficiency.
- Gas Applications: Flare fittings can also be extensively utilized in gas plumbing systems, offering reliable and secure connections for your distribution of gases, including natural gas or propane.
- Hydraulic Tubing Applications: Flare fittings are compatible with use with assorted materials, including copper, brass, aluminum, and welded steel hydraulic tubing. Their versatility enables them to be employed in diverse hydraulic systems.
- Hard-to-Hold Liquids and Gases: Flare fittings are engineered for hard-to-hold liquids and gases, providing a reliable and leak-proof connection in challenging applications where containment is essential.
To summarize, flare fittings offer multiple advantages, including potential to deal with mechanical pull-out, easy assembly and disassembly, and make use of of high-quality brass materials. These fittings find widespread applications in flammable liquid, marine, refrigeration, gas, hydraulic, and challenging liquid and gas plumbing systems. Their versatility, reliability, and leak-proof connections make them an important component for a variety of plumbing projects.
| Advantages | Applications |
|---|---|
| Effectiveness against mechanical pull-out | Flammable liquid applications |
| Repeated assembly and disassembly | Marine applications |
| Created from high-quality brass materials | Refrigeration applications |
| Gas applications | |
| Hydraulic tubing applications | |
| Hard-to-hold liquids and gases |
Additional Options and Pricing
As well as the standard configurations, flare fittings offer an array of additional options to satisfy specific plumbing requirements. These options include:
- Bulkheads: Employed for creating secure connections in confined spaces or through barriers.
- Auxiliary Fittings: Provide flexibility and adaptability in complex plumbing systems.
- Special Fittings: Customizable to satisfy unique project specifications.
- UL Stamped Fittings: Ensuring compliance with rigorous quality and safety standards.
When purchasing flare fittings, it is essential to take into account the pricing of non-stock items and consult the price list provided by the manufacturer. For special configurations, it is strongly recommended to submit a print or sketch to find out about pricing and availability. Take note that prices and availability are subjected to change without prior notice, so it is advisable to keep an eye on the latest information.
Flare Fittings Pricing Comparison
| Configuration | Pricing |
|---|---|
| Standard Flare Fitting | $5.99 |
| Bulkhead Flare Fitting | $8.99 |
| Auxiliary Flare Fitting | $6.99 |
| Special Flare Fitting | Custom Pricing |
Note: The pricing shown is made for illustrative purposes only and could vary dependant upon the manufacturer and distributor.
Streamline ACR Press System
The Streamline ACR Press System is revolutionizing the plumbing industry with its cutting-edge technology and innovative design. Engineered to provide superior performance and reliability, this system incorporates the latest advancements to offer exceptional results in flare fittings.
The standout feature of the Streamline ACR Press Product is its Two Ring Advanced Press (T.R.A.P.) Technology. This groundbreaking technology ensures a stronger and much more secure seal by creating 200% more surface contact involving the fitting and the tubing. With T.R.A.P. Technology, you can have complete confidence within the integrity of your connections.
The DualSeal Ring Design from the ACR Press System further enhances its sealing capabilities. This design guarantees a good and reliable seal, minimizing the risk of leaks and ensuring long-lasting performance. Additionally, the program includes the TrapZone Leak Barrier, an added layer of protection which offers an added degree of security against potential leaks.
In terms of joint compression and sealing performance, the Streamline ACR Press System delivers exceptional results. The Force360 Press Contour technology ensures a much more uniform compression, promoting a trusted and tight seal every time. Furthermore, the Tri-Lock Press Profile enhances joint strength, making the system highly durable and immune to any mechanical stress.
Compatibility is key when it comes to plumbing systems, as well as the Streamline ACR Press System excels in this field. It works with R410A and other widely used refrigerant gases and oils, which makes it suitable for a variety of applications. Whether you’re focusing on commercial or residential projects, this technique was created to meet your specific needs.
As being a testament to its quality and sturdiness, the Streamline ACR Press System comes with a 10-year limited warranty against defects in material and workmanship. This warranty offers satisfaction and makes sure that you’re buying a reliable and long-lasting solution for your plumbing needs.
Bringing It All Together
The Flare x Copper Tube Compression Adapter is a vital component for secure and reliable connections in plumbing projects. Its versatile options, easy assembly instructions, and industry-leading innovations make it the ideal selection for plumbers and contractors alike.
With the Flare x Copper Tube Compression Adapter, you can gain a leak-proof seal and ensure the correct flow of liquids and gases. Whether you are working on residential or commercial plumbing projects, this adapter provides the durability and satisfaction required to complete the job right.
By including the Flare x Copper Tube Compression Adapter to your plumbing projects, you can have satisfaction understanding that your connections are secure and reliable. Leave behind leaks and inefficient flow, and hello to a plumbing system that performs at its best.